TechRxiv
Current_probe_EZ_17_en_rev4.pdf (751.9 kB)
Download file

MODEL OF THE ROHDE & SCHWARZ EZ-17 CURRENT PROBE AND CREATION OF A DIY ANALOG FOR EMI STUDY

Download (751.9 kB)
preprint
posted on 23.02.2022, 04:05 authored by DENYS ZAIKINDENYS ZAIKIN
This article presents a description of the process of creating a model of the EZ-17 (Model 02) current probe by Rohde & Schwarz, which is extensively used in electromagnetic compatibility (EMC) research. A methodology for evaluating each component of the model is outlined step by step. However, the goal is not to physically disassemble an EZ-17 sensor, but to use only the parameters provided in the technical specifications of the device in creating the model. A comparison of the simulation results and the characteristics in the documentation shows a good fit between the model and the real device. An attempt was made to construct a doit-yourself (DIY) analog of the EZ-17 sensor using inexpensive parts and experimental comparisons were made between the analog and the actual device.

History

Email Address of Submitting Author

den913@gmail.com

ORCID of Submitting Author

https://orcid.org/ 0000-0003-4080-5631

Submitting Author's Institution

Advent Technologies A/S

Submitting Author's Country

Denmark