dolan MSR draft 2021.04.27.pdf (451.08 kB)
Download file

Molten Salt Reactors

Download (451.08 kB)
posted on 2021-05-04, 09:40 authored by Thomas DolanThomas Dolan

Molten Salt Reactors

© Thomas J. Dolan, Member, IEEE 2021

Abstract— Nuclear power is advancing slowly because of public concerns about nuclear accidents, radioactive waste, fuel supply, cost, and nuclear proliferation. The development of molten salt reactors could alleviate most of these concerns and prevent water-cooled reactor accidents like those at Three Mile Island, Chernobyl, and Fukushima. The purpose of this article is to provide information about the potential advantages and problems of molten salt reactors. The coolants could be either fluorides or chlorides, operated above their melting temperatures, to avoid solidification, and well below their boiling temperatures, to prevent evaporation losses. “Fast” reactors use energetic fission neutrons, while “thermal” reactors use graphite to slow the neutrons down to thermal energies. We describe four reactor types: solid fuel thermal, liquid fuel thermal, liquid fuel fast, and “stable salt” fast reactors (liquid fuel in tubes). We discuss load following, reactor design projects, and development problems. Liquid fuel reactors will require a chemical processing plant to adjust fissile fuel inventory, fission products, actinides, and corrosivity in a hot, highly-radioactive environment.




Email Address of Submitting Author

ORCID of Submitting Author


Submitting Author's Institution

University of Illinois at Urbana-Champaign

Submitting Author's Country

  • United States of America