formatted_IEEEthz_submit.pdf (1.09 MB)
Download file

Phase locking of THz QC-VECSELs to a microwave reference

Download (1.09 MB)
posted on 2023-01-19, 04:05 authored by Christopher A. Curwen, Jonathan Kawamura, Darren J. Hayton, Sadhvikas J. Addamane, John L. Reno, Benjamin WilliamsBenjamin Williams, Boris Karasik

High resolution frequency study and phase-locking have been performed on terahertz quantum-cascade vertical-external-cavity surface-emitting-lasers at 2.5 THz and 3.4 THz. A subharmonic diode mixer is used to downconvert the THz signal to a gigahertz intermediate frequency (IF). Feedback from reflections at the mixer are observed to have a strong influence on the free-running QC-VECSEL frequency stability as a result of efficient coupling to free-space compared to more typical ridge waveguide lasers. Instabilities in feedback result in free-running linewidths of tens of MHz, and at times >100 MHz. The QC-VECSEL IF signal is phase locked to a 100 MHz reference using the bias on the device as a means of error correction. Between 90-95% of the QC-VECSEL signal is locked within 2 Hz of the multiplied RF reference, and amplitude fluctuations on the order of 1-10% are observed, depending on the bias point of the QC-VECSEL. The bandwidth of the locking loop is ~1 MHz. Many noise peaks in the IF signal corresponding to mechanical resonances in the 10 Hz-10 kHz range are observed. These peaks are generally -30 to -60 dB below the main tone, and are below the phase noise level of the multiplied RF reference which ultimately limits the phase noise of the locked QC-VECSEL.


Email Address of Submitting Author

ORCID of Submitting Author


Submitting Author's Institution

University of California Los Angeles

Submitting Author's Country

  • United States of America