The Ground Switcher
I propose a new semiconductor device capable of switching between ground or resistance. I use 2 electrodes Anode and Gate respectively. The gate is used to turn the component into a resistor, and without gate voltage, it’s a normal ground element. In this paper, we will look at the results of the simulation obtained with Visual TCAD. Every circuit requires a ground element and usually, it’s used to complete the circuit, this component acting as a resistor can save some electrons from grounding and we will use these electrons to provide an alternate path so they can flow through a different branch of the circuit this can save from power loss and every little current can be used in some way.
Email Address of Submitting Authorthakurusama72@gmail.com
ORCID of Submitting Authorhttps://orcid.org/0000-0002-0892-0325
Submitting Author's InstitutionIndependent Researcher
Submitting Author's Country