Underactuated Base-to-Distal Hand Exoskeleton for Adaptive grasping Assistance
Hand exoskeletons are wearable devices that can provide outer kinematic coupling with human hands and thus assist movement of human fingers. However, conventional rigid hand exoskeletons are characterized by their bulky and complex structures, which are often incompatible with human finger joints and restrict finger’s natural motion. This paper reports an underactuated base-to-distal hand exoskeleton that provides adaptive grasping assistance. An underactuated 8-bar base-to-distal linkage driven by a cable is used to flex and extend fingers and it applies force only to the distal phalanges of fingers, which not only makes the hand exoskeleton adapt to different sizes of fingers but also allows all phalanges to naturally accommodate the geometry of the objects to be grasped. The kinematic model of the 8-bar linkage is derived in order to generate desired hand ges-tures. A five-finger hand exoskeleton with active flexion/extension (F/E) for all fingers and active abduction/adduction (Ab/Ad) for the thumb is assembled and then tested on a healthy subject and a stroke survivor. Experimental results show that the hand exoskeleton can generate sufficient fingertip force for regular tasks. The hand exoskeleton enables the healthy participant and the stroke survivor to achieve 90% and 52% of their passive range of F/E motions respectively. In addition, the stroke survivor can accomplish various training tasks, such as grasping, pinching and writing, with the assistance of the hand exoskeleton. These results demonstrate that the underactuated base-to-distal hand exoskeleton can be an effective device for rehabilitation training or daily-life assistance for patients with a hemiparetic hand.
Email Address of Submitting Authorchenwenyuan@sia.cn
Submitting Author's InstitutionShenyang Institute of Automation, Chinese Academy of Sciences (CAS), Shenyang 110016, China,
Submitting Author's Country