loading page

Zero-Compression, Laminar Electron Beam Generation in a Uniform Magnetic Field
  • Robert Jackson ,
  • R. L. Ives ,
  • M. E. Read
Robert Jackson
Calabazas Creek Research

Corresponding Author:[email protected]

Author Profile
R. L. Ives
Author Profile
M. E. Read
Author Profile


The need for enhanced performance of high- power RF vacuum electron devices has led to investigation of multiple-beam, sheet beam and annular beam configu- rations. A key issue with such devices is the magnetic field shaping required to produce high-power, laminar beams. Field shaping is difficult when Pierce-type gun geometries are employed. The development of high current density cathodes makes the necessary beam power achievable without compression. Such cathodes can operate within a uniform magnetic field yielding advantages for both single and distributed-beam RF devices. However, the quality of the resulting beams presents problems. A project to optimize beam quality in zero-convergence electron guns was undertaken by Calabazas Creek Research (CCR) and North Carolina State University (NCSU). The surprising result was that high quality electron beams can be gener- ated in uniform magnetic fields using convex (dome) shaped cathodes. The underlying physics involves perturbation of the beam cyclotron motion by a non-adiabatic radial electric field impulse. This paper examines this physical mechanism and extends the initial result to additional diode and beam geometries.