loading page

Wideband Gap-Waveguide Phase Shifter Based on a Glide-Symmetric Ridge
  • +2
  • Ángel Palomares-Caballero ,
  • Carlos Megías ,
  • Carlos Molero ,
  • Antonio Alex-Amor ,
  • Pablo Padilla
Ángel Palomares-Caballero
Universidad de Granada, Universidad de Granada

Corresponding Author:[email protected]

Author Profile
Carlos Megías
Author Profile
Carlos Molero
Author Profile
Antonio Alex-Amor
Author Profile
Pablo Padilla
Author Profile

Abstract

This paper presents a gap-waveguide phase shifter based on ridged unit cell with glide-symmetric configuration. The proposed unit cell design provides higher phase shift compared with a conventional ridged unit cell whose ridge height and waveguide width are tuned to achieve a stable phase shift. Through the insertion of glide-symmetric holes with semi-circle base in the ridged waveguide, a stable phase shift in a wide frequency range is achieved. Depending on the radii of the holes, the stable phase shift can be covered the desired frequency range. A 90o phase shifter in millimeter-wave range is designed in order to validate the analysis. The impedance bandwidth of the phase shifter is from 32 GHz to 42.5 GHz (28.18%) providing a phase shift of 90o+- 2o in the entire frequency range.
Jan 2023Published in IEEE Microwave and Wireless Technology Letters volume 33 issue 1 on pages 27-30. 10.1109/LMWC.2022.3203657