Essential Maintenance: All Authorea-powered sites will be offline 9am-10am EDT Tuesday 28 May
and 11pm-1am EDT Tuesday 28-Wednesday 29 May. We apologise for any inconvenience.

loading page

Finite-Set Direct Torque Control via Edge Computing-Assisted Safe Reinforcement Learning for a Permanent Magnet Synchronous Motor
  • Maximilian Schenke ,
  • Barnabas Haucke-Korber ,
  • Oliver Wallscheid
Maximilian Schenke
Paderborn University, Paderborn University

Corresponding Author:[email protected]

Author Profile
Barnabas Haucke-Korber
Author Profile
Oliver Wallscheid
Author Profile

Abstract

Advances in the field of reinforcement learning (RL)-based drive control allow formulation of holistic optimization goals for the data-driven training phase. The resulting controllers feature efficient drive operation without the necessity of an a priori known plant model but, so far, conduction of the corresponding training phase in real-world drive systems has been applied only sparsely due to safety concerns. This contribution targets the challenging problem of self-learning torque control for a permanent magnet synchronous motor assuming a finite control set (FCS), i.e., the direct selection of switching actions instead of a modulator-based setup. In order to allow a secure and effective online training with real-world drive systems, the RL controller is monitored by a safeguarding algorithm that prevents application of unsafe switching actions, e.g., such that result in overcurrent. The accruing amount of measurement data is handled with the use of an edge computing pipeline to outsource the RL training from the embedded control hardware. The inference of the utilized artificial neural network in hard real time is realized with the use of a reconfigurable FPGA architecture. The resulting RL-based algorithm is able to learn a torque control policy in just ten minutes which has been validated during comprehensive real-world experiments.
Nov 2023Published in IEEE Transactions on Power Electronics volume 38 issue 11 on pages 13741-13756. 10.1109/TPEL.2023.3303651