loading page

The Ground Switcher
  • Usama Thakur
Usama Thakur
Independent Researcher

Corresponding Author:[email protected]

Author Profile


I propose a new semiconductor device capable of switching between ground or resistance. I use 2 electrodes Anode and Gate respectively. The gate is used to turn the component into a resistor, and without gate voltage, it's a normal ground element. In this paper, we will look at the results of the simulation obtained with Visual TCAD. Every circuit requires a ground element and usually, it's used to complete the circuit, this component acting as a resistor can save some electrons from grounding and we will use these electrons to provide an alternate path so they can flow through a different branch of the circuit this can save from power loss and every little current can be used in some way.