loading page

DC converter integrating a DC voltage control based on a virtual resistance
  • +3
  • Ghazala Shafique,
  • Johan Boukhenfouf,
  • Francois Gruson,
  • Shabab Samimi,
  • Frédéric Colas,
  • Xavier Guillaud
Ghazala Shafique
L2EP

Corresponding Author:[email protected]

Author Profile
Johan Boukhenfouf
Author Profile
Francois Gruson
Author Profile
Shabab Samimi
Author Profile
Frédéric Colas
Author Profile
Xavier Guillaud
Author Profile

Abstract

The future multi-terminal direct-current (MTDC) grid will require the interconnection of point-to-point highvoltage (HV) DC links with different specifications such as DC voltage level, system grounding configuration and HVDC technology. To adapt these differences, DC/DC converters are mandatory to interconnect HVDC links. Additionally, they are capable of providing supplementary functions as they are highly controllable devices. In this paper, a primary virtual resistance DC voltage controller associated with DC/DC converter is proposed for managing DC grid voltages of the interconnected HVDC grids, increasing the reliability of the system. The commonly known topology, Front-to-Front Modular Multilevel Converter (F2FMMC) is adopted for DC/DC converter. Time-domain simulation are performed using EMTP software for validating the controller behaviour under power disturbances and large event of loss of one converter in a MMC based MTDC system. All converters are modelled using reduced order modelling (ROM) methodology. Apart from this, dynamic studies have been carried out using linear state space model for small-signal stability analysis of a HVDC system integrating DC/DC converter with virtual resistance DC voltage controller. The
26 Jan 2024Submitted to TechRxiv
29 Jan 2024Published in TechRxiv