loading page

CLPDI Algorithm in UWB Synchronization
  • Simone Soderi ,
  • Matti Hämäläinen ,
  • Jari Iinatti Iinatti
Simone Soderi
IMT School for Advanced Studies

Corresponding Author:[email protected]

Author Profile
Matti Hämäläinen
Author Profile
Jari Iinatti Iinatti
Author Profile

Abstract

This paper studies code synchronization in time hopping (TH) ultra wideband (UWB) systems. In TH UWB systems, narrow pulses based on Gaussian pulse are positioned in different locations in consecutive time frames. The location of each frame is defined by a spreading code. The receiver collects the energy of the pulses using the same spreading code. To be able to do that, it has to synchronize itself to the incoming signal. Due to the large bandwidth of the signal, several replicas of the signals arrive into the receiver. Thus, the energy of the signal is spread in time domain causing extra problems to the synchronization procedure. In this paper, earlierly proposed method for direct sequence spread spectrum system is applied for time hopping system. The method is simulated in a multipath environment. The performance measure used is the mean acquisition time. Con- stant false alarm rate criterion is used for the threshold setting rule for comparator. The energies of the multipath components are combined in the acquisition process. Therefore, diversity combining is obtained in the acquisition process, which also leads to performance improvement.