loading page

Implementation of a GNU Radio Based Search and Rescue Receiver on ESA's OPS-SAT Space Lab
  • Tom Mladenov ,
  • David Evans ,
  • Vladimir Zelenevskiy
Tom Mladenov
ESA European Space Agency

Corresponding Author:[email protected]

Author Profile
David Evans
Author Profile
Vladimir Zelenevskiy
Author Profile


OPS-SAT is the first publicly accessible Hardware/Software innovation Lab in Low Earth Orbit. It was launched by the European Space Agency (ESA) on December 18th 2019 and is open to European academia and industry allowing new concepts to be tested in space with a range of interesting payloads. This paper discusses the implementation and results of an In-orbit Demonstration (IOD) using the Software Defined Radio (SDR) payload of OPS-SAT together with on-board RF Processing techniques. We demonstrate the design of a software configurable Search and Rescue receiver using GNU Radio, running on Linux in a 3U CubeSat. The system runs on the Satellite Experimental Processing Platform (SEPP) Cyclone V ARM System-on-chip and is able to autonomously detect and decode transmissions from terrestrial 406 MHz beacons from the global COSPAS-SARSAT search and rescue system. Decoded beacon information is logged on-board together with metadata and is downloaded to Mission Control at ESA/ESOC. The successful IOD paves the way for in-orbit RF experimentation and bridges the gap between satellite operations and the IoT era.
01 May 2022Published in IEEE Aerospace and Electronic Systems Magazine volume 37 issue 5 on pages 4-12. 10.1109/MAES.2022.3143875