loading page

GSM Based Home Security Alarm System Using Arduino Using Mobile Call
  • +2
  • Aditi Golder ,
  • Debashis Gupta ,
  • Saumendu Roy ,
  • Md. Abdullah Al Ahasan ,
  • Mohd Ariful Haque
Aditi Golder
Jahangirnagar University

Corresponding Author:[email protected]

Author Profile
Debashis Gupta
Author Profile
Saumendu Roy
Author Profile
Md. Abdullah Al Ahasan
Author Profile
Mohd Ariful Haque
Author Profile

Abstract

In this 21st era, criminality is increasing, and everybody wishes safety for their home and assets. So that in this situation, everyone should have a secure system with developing and modern technology. So a person should not be worried when moving away from his home. As a result, therefore, the objective of this project is to afford the home security device which gives the quickest message to the client GSM (Global System for Mobile) cell phone device applying a phone call. Our Home security system has been followed by the latest technology at a low cost. The hardware of this system has been created using PIR (Passive Infra-Red) movement sensor, Arduino sensor as the fundamental for movement recognition, and GSM module for calling to the system user. For programming, this framework applies Arduino IDE for Arduino and Putty for analyzing joining programming in the GSM unit. The PIR sensor has played an important feature that can be used here for the security purpose of any unknown persons and automatically creates calls when encroaching neighboring circles sensed by the PIR sensor. The Integrated Home Safety framework has been examined and also accomplishes to sense the movement of a human.