The changing energy landscape due to the large scale integration of renewable energy and shutting down of conventional thermal plants has opened up the potential of alternate sources in the blackstart services market. Grid forming wind turbines can do controlled islanded operation independent of an external grid voltage and thus, participate in network restoration from the start. However, it is necessary to study the capability of wind turbines to deal with the demanding energization transients in a controlled and stable manner. This work investigates the feasibility of using virtual resistance in the wind turbine converter control to reduce transients during self-transformer inrush and sympathetic interaction from downstream string transformers. This can eliminate the need for pre-insertion resistors during sequential energization. The sensitivity of the AC current and voltage output along with DC link transient to the virtual resistance parameters has also been analyzed using PSCAD simulations. Finally the effectiveness of the proposed method for offshore network energization by a grid forming wind power plant has been tested by comparing to results for a pre-insertion resistor.

In recent years, renewable energy sources have been integrated on a large scale in power systems all around the world to address the environmental sustainability concerns. With conventional thermal generators being phased out, large offshore wind power plants present a viable alternative to provide blackstart services for power system restoration. In this paper, by means of simulations, grid-forming wind turbines are shown to successfully energize the offshore transformer and the HVDC export link in a controlled manner, to ultimately supply the onshore grid. Two methods for energizing the offshore network have been compared: the prevalent hard-switching approach and the more complex soft-start method. Additionally, control has been implemented to mitigate the significant transients in the export link associated with pre-charging of the onshore converter. It is shown that soft-start can provide faster energization with smaller transients compared to hard-switching. Moreover, the sensitivity analyses performed in this study illustrate the impact of pre-insertion resistor design and voltage ramp-up rates on transients during hard-switching and soft-start, respectively. The results presented in the paper also show that a separate controlled pre-charging stage of the onshore converter from its DC terminals is essential for the safe energization and operation of the export link. The manuscript has been accepted for publication in IET Renewable Power Generation.

Diode rectifiers (DRs) have been recently suggested as a viable alternative for connecting offshore wind farms (OWFs) to HVdc, eliciting growing interest from both industry and academia. However, energisation of DR-connected OWFs is not straightforward. The present study constitutes a proof of concept of a novel energisation method for DR-connected OWFs, in which auxiliary power is provided from the shore through the HVdc link and the dc bus bar of one or more WTs. The proposed method provides an alternative with minimal additional hardware, which can be easily extended to more WTs in the OWF, increasing reliability by providing redundancy. The study includes coinciding auxiliary loads with active and reactive power components and a semi-aggregated OWF model, in which every WT is individually represented in the string containing the energising WT. An additional sequence of simulation events is considered following the initial energisation sequence. Such sequence comprises wind power taking over the provision of the auxiliary power. The simulation results indicate that the proposed method is a suitable alternative for energising OWFs connected to HVdc via DRs. The manuscript has been submitted to the CIGRÉ Symposium 2021.

Before diode rectifier (DR) technology for connecting offshore wind farms (OWFs) to HVdc is deployed, in-depth studies are needed to assess the actual capabilities of DR-connected OWFs to contribute to the secure operation of the networks linked to them. This study assesses the capability of such an OWF to provide communication-less frequency support (CLFS) to an onshore ac network. It is shown that the HVdc link’s offshore terminal direct voltage can be estimated from measurements at the OWF’s point of connection with the DR platform. Two different methods are proposed for implementing CLFS in the OWF active power controls. In Method 1, the estimated offshore terminal direct voltage is used for estimating the onshore frequency deviation. In Method 2, the actual offshore terminal direct voltage measurement is used instead. Unique features of the provision of CLFS from OWFs connected to HVdc via DRs are highlighted, and the dynamic and static performance of the CLFS control scheme is compared to that of the communication-based frequency support scheme. To assess the impact of parameter estimation errors on the provision of CLFS, a parametric sensitivity study is presented as well, and recommendations are given to increase accuracy. The manuscript has been accepted for publication in IEEE Transactions on Sustainable Energy.

Recently put forward as a feasible alternative for connecting OWFs to HVdc networks, diode rectifiers (DRs) have elicited growing interest from both academia and industry. Energisation of such OWFs is, however, not straightforward. The present study constitutes a proof of concept for the application of a novel energisation method to the case of an OWF connected to HVdc via DRs. The proposed method provides a robust and reliable alternative with minimal additional hardware, i.e. short additional dc cables connecting the dc bus bar of the energising WT to the HVdc link, and corresponding dc disconnectors at the cable terminals and at the DR dc terminals. This can be easily extended to more WTs in the OWF, increasing reliability by providing redundancy. The simulation results indicate that the proposed method is a suitable alternative for energising OWFs connected to HVdc via DRs. The manuscript has been accepted for presentation in the 45th Annual Conference of the IEEE Industrial Electronics Society (IECON 2019).